GEL COATS
General Lamination
GEL COATS
General purpose polyester resin, pre-accelerated and thixotropic. It has very good wetting characteristics to fiberglass, can be used by manual or spray methods, moderate exothermic reaction and fast hardness development, with good curing time and resilience, designed for a wide variety of processes and products.
PPT-201-10
Unsaturated polyesters, modified terephthalics, preaccelerated, thixotropic, good mechanical properties, moderate residual tack release, comply with FMVSS 302 standard. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT-201-15
Unsaturated polyesters, modified terephthalics, preaccelerated, thixotropic, good mechanical properties, moderate residual tack release, comply with FMVSS 302 standard. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT-201-20
Unsaturated polyesters, modified terephthalics, preaccelerated, thixotropic, good mechanical properties, moderate residual tack release, comply with FMVSS 302 standard. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT-4001
Unsaturated, hybrid, pre-accelerated, thixotropic polyester resins, without residual tack, rapid hardness development, good wetting of mineral fillers and fiberglass. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT-4015
They are unsaturated, hybrid, preaccelerated, thixotropic polyester resins, with no residual stickiness, good wetting to fiberglass, and good mechanical properties. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT-4020
They are unsaturated, hybrid, preaccelerated, thixotropic polyester resins, with no residual stickiness, good wetting to fiberglass, and good mechanical properties. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT-4032
They are unsaturated, hybrid, preaccelerated, thixotropic polyester resins, with no residual stickiness, good wetting to fiberglass, and good mechanical properties. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT-5536
Unsaturated polyester, hybrid, preaccelerated, thixotropic, excellent adherence to acrylic, rapid hardness development, validated according to ASTM C-297. Recommended for the fabrication of acrylic tubs and sinks where spray or hand molding processes are used.
PPT-5539
Unsaturated polyester, hybrid, preaccelerated, thixotropic, excellent adherence to acrylic, rapid hardness development, validated according to ASTM C-297. Recommended for the fabrication of acrylic tubs and sinks where spray or hand molding processes are used.
PPT-5540
Unsaturated polyester, hybrid, preaccelerated, thixotropic, excellent adherence to acrylic, rapid hardness development, validated according to ASTM C-297. Recommended for the fabrication of acrylic tubs and sinks where spray or hand molding processes are used.
PPT-585
Unsaturated, hybrid, pre-accelerated, thixotropic polyester resins, no residual tack, rapid hardness development, good wetting to fiberglass. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT-5857
Unsaturated polyester, orthophthalic, preaccelerated, thixotropic, moderate residual tack release, excellent storage stability, good wetting to fiberglass. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used, and for the re-packaging of liters, gallons, buckets, etc.
PPT-607
Unsaturated, hybrid, pre-accelerated, thixotropic polyester resins, no residual tack, rapid hardness development, good wetting to fiberglass. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
100-BA-001
White orthophthalic gel-coats, finishing, good resistance to runoff. They are formulated for use in the manufacture of fiberglass parts in open molding processes.
100-GA-001
It is a gray orthophthalic gel-coat, with a finish and good resistance to runoff. It is used in the manufacture of fiberglass parts in open molding processes.
100-NA-001
Black orthophthalic gel-coat, finishing, good resistance to runoff. Designed for use in the manufacture of fiberglass parts in open molding processes.
100-XB-002
It is a neutral orthophthalic gel-coat, with a finish and good resistance to runoff. Formulated to be used in the manufacture of fiberglass parts in open molding processes.
150-B-005
White isophthalic gel-coat, sandable and good resistance to runoff. It is used in the manufacture of fiberglass parts in open molding processes.
150-G-305
They are gray isophthalic gel-coats, sandable and with good resistance to runoff. Formulated to be used in the manufacture of fiberglass parts in open molding processes.
200-A-001
Blue isophthalic gel-coats, paraffin-coated, without residual stickiness and good resistance to run-off. They are designed for use in the manufacture of fiberglass parts in open molding processes where it is required to cover the appearance of the fiberglass.
200-A-002
Blue isophthalic gel-coats, paraffin-coated, without residual stickiness and good resistance to run-off. They are designed for use in the manufacture of fiberglass parts in open molding processes where it is required to cover the appearance of the fiberglass.
200-B-020
It is a white isophthalic gel-coat, waxy, with no residual stickiness and good resistance to runoff. It is formulated for use in the manufacture of fiberglass parts in open molding processes where it is required to cover the appearance of the fiberglass.
200-B-114
It is a white isophthalic gel-coat, very good flexibility, for finishing. Specially designed for the manufacture of fiberglass panels, roofs, cabins, automotive vehicle parts in open molding processes.
200-BA-001
White isophthalic gel-coat for finishing. They are formulated for use in the manufacture of fiberglass parts in open molding processes.
200-G-050
They are gray isophthalic gel-coats, with very good flexibility, for finishing. Specially designed to be used in the manufacture of fiberglass parts for cooling towers in open molding processes.
200-GI-009
They are gray isophthalic gel-coats, with very good flexibility, for finishing. Specially designed to be used in the manufacture of fiberglass parts for cooling towers in open molding processes.
200-NA-001
This gel-coat is black in tone, isophthalic, with a finish. It is formulated to be used in the manufacture of fiberglass parts in open molding processes.
200-S-071
Isophthalic gel-coat of a dirty white color, very good flexibility, for finishing, stabilized against UV rays. Recommended for use in the manufacture of fiberglass parts for cooling towers in open molding processes.
200-TA-001
It is a transparent isophthalic gel-coat for finishing. Designed for use in the manufacture of fiberglass parts in open molding processes.
200-XB-002
Neutral isophthalic finishing gel-coat, ready to be pigmented. It is used in the manufacture of fiberglass parts in open molding processes.
200-B-127
Isophthalic white finish gel-coat, Developed under the ANSI Z124.1,.2-1995, Secc. 6.1.1. Specially formulated to be used in manufacturing fiberglass in open mold processes.
